HP2023JN is a Low Density Polyethylene grade suitable for general-purpose packaging. It exhibits better draw down, good optical and mechanical properties. HP2023JN contains slip and antiblock additives.
TYPICAL APPLICATIONS
Thin shrink film, lamination film, produce bags, textile packaging, soft goods packaging, general-purpose bags with good optics and t-shirts carrier bags.
| Original Document | Technical Datasheet(English) | |||
| Solutions | Foam & Lightweight | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** - | ASTM D 2457 | 45° |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 30 μ film |
Yield | *** Mpa | ASTM D 882 | TD, 30 μ film |
Break | *** Mpa | ASTM D 882 | MD, 30 μ film |
Break | *** Mpa | ASTM D 882 | TD, 30 μ film |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 30 μ film |
Break | *** % | ASTM D 882 | TD, 30 μ film |
Elmondorf Tear | *** g/µm | ASTM D 1922 | MD, 30 μ film |
Elmondorf Tear | *** g/µm | ASTM D 1922 | TD, 30 μ film |
Secant Modulus | *** Mpa | ASTM D 882 | MD, 30 μ film, 1% secant |
Secant Modulus | *** Mpa | ASTM D 882 | TD, 30 μ film, 1% secant |
Dart Drop Impact | *** g/µm | ASTM D 1709 | F50, 30 μ film |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
