SABIC® LDPE 2102N3W is a general purpose grade with a high level of anti block and slip agent. This grade offers good optical properties and a very good draw down ability.
Application
SABIC® LDPE 2102N3W is typically used for packaging films for food and industrial goods and for lamination films. This grade is typically used when high draw down is required The usual melt-2 film thickness can be reduced by 10-40%, maintaining an adequate CoF level.
SABIC® LDPE 2102N3W can typically be used for food applications due to very low migration levels.
Film properties
Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
| Original Document | Technical Datasheet(English) | |||
| Solutions | Foam & Lightweight | |||
| Features | Food ContactLow Migration | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ASTM 1894 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10 N (VST/A) |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | MD |
Yield | *** Mpa | ISO 527-3 | TD |
Break | *** Mpa | ISO 527-3 | MD |
Break | *** Mpa | ISO 527-3 | TD |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD |
Break | *** % | ISO 527-3 | TD |
Elmondorf Tear | *** N/mm | ISO 6383-2 | MD |
Elmondorf Tear | *** N/mm | ISO 6383-2 | TD |
Dart Drop Impact | *** J/mm | ASTM D4272 | |
Elastic Modulus | *** MPa | ISO 527-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
