HDPE B5822M is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength. It exhibits a very good combination of high stiffness and high stress cracking resistance. HDPE B5822M demonstrates good organoleptic properties and has a broad molecular weight distribution.
TYPICAL APPLICATIONS
B5822M is specially designed for small blow molded bottles applications (<10 L) for packaging of consumer goods, Bottles for Industrial use, Jerry Cans, Sports, Leisure & Toys.
| Original Document | Technical Datasheet(English) | |||
| Processing | Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
190℃/21.6 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
FNCT | *** hr | ISO 16770 | 3.5 MPa, 2 % Igepal BC/9, 80°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
Tensile Impact | *** kJ/m² | ISO 8256 | -30°C (Notched) |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Processing Temperature | ***~*** °C | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
