SABIC® FORTIFY™ C1055D is an ethylene octene copolymer. This product is available as free flowing pellets.
SABIC® FORTIFY™ C1055D is designed as a low density and high performance copolymer modifier to provide superior impact properties and flow characteristics.
TYPICAL APPLICATIONS
Impact modifier in thermoplastic olefin compounds, footwear midsoles and wire and cable extrusion.
| Original Document | Technical Datasheet(English) | |||
| Solutions | Foam & LightweightShoes/Footwear | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Applications | Compounding/BlendingWire & CableImpact ModifierShoe/Footwear Soles | |||
| Appearance | Pellets/Granules | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mooney Viscosity | *** MU | ASTM 1646 | ML 1+4, 121 °C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
at 100% strain | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant |
Tear Strength | *** kN/m | ASTM D 624 | Type C |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 1 second |
Shore D hardness | *** D | ASTM D 2240 | 1 second |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | Peak |
Glass Transition Temperature | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
