PBAT Compound BT02-203 is a biodegradable polyester for blown film extrusion.
| Original Document | Technical Datasheet(English) | |||
| Features | Bio-basedDegradable | |||
| Additive | Release Agent | |||
| Appearance | Pellets/Granules | |||
| Processing | ExtrusionBlown Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Moisture /Humidity Absorption | *** % | ISO 62 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | 10℃/min |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | MD, Blown Film, 20um |
Break | *** Mpa | ISO 527 | TD, Blown Film, 20um |
Tensile Elongation | |||
Break | *** % | ISO 527 | MD, Blown Film, 20um |
Break | *** % | ISO 527 | TD, Blown Film, 20um |
Tensile Modulus | *** Mpa | ISO 527 | MD, Blown Film, 20um |
Tensile Modulus | *** Mpa | ISO 527 | TD, Blown Film, 20um |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
