Polyamide 66, 15% glass-fiber reinforced for injection molding.
Characteristics
1)Excellent mechanic and chemical property
2)Excellent electrical property
3)Excellent wear property
4)Excellent heat resistance property
5)Excellent surface smoothness
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceGood SurfaceWear/Abrasion ResistanceChemical ResistanceFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | 15% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Moisture /Humidity Absorption | *** % | ISO 62 | 50%RH |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | dry |
Tensile Elongation | |||
- | *** % | ISO 527 | dry |
Flexural Modulus | *** Mpa | ISO 178 | dry |
Flexural Strength | |||
- | *** Mpa | ISO 178 | dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Melt Temperature(Tm) | *** °C | ISO 3146 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | dry |
Surface Resistivity | *** Ohm | IEC 60093 | dry |
Dielectric Strength | *** kV/mm | IEC 60243-1 | dry, 2mm thickness |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
