Texin 985AR resin is an aromatic polyether-based thermoplastic polyurethane; it can be processed by injection molding or extrusion.
Properties / Applications:
Texin 985AR resin offers outstanding abrasion resistance, impact strength, toughness, and flexibility. It also exhibits excellent hydrolytic stability. Texin 985AR natural color resin complies with FDA food-contact regulations 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber Articles Intended for Repeated Use), subject to the limitations of these and other applicable regulations. In addition, Texin 985AR natural color resin is listed under NSF standard 61 for use in potable water applications.
Applications include belting, hose, seals and gaskets, tubing, cable jackets, hose jackets, athletic soles, grips, mine screens, film, and extruded profiles. As with any product, use of Texin 985AR resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessGood FlexibilityWear/Abrasion ResistanceFood ContactDrinking Water ContactHydrolysis Resistance | |||
| Processing | InjectionExtrusion | |||
| Compliance | FDANSF | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | ISO 2577 | 2.54 mm |
Across Flow | *** % | ISO 2577 | 2.54 mm |
Abrasion resistance | *** mg/1000cy | ISO 4649 | H-18, 1,000-g Load |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | |
at 100% strain | *** Mpa | ISO 37 | |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
Break | *** % | ISO 37 | |
Flexural Modulus | *** Mpa | ISO 178 | -30°C |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
Flexural Modulus | *** Mpa | ISO 178 | 70°C |
Tear Strength | *** kN/m | ISO 34 | Die C |
Compression Set | *** % | ISO 815 | 23°C, 22 hr, Post-cured |
Compression Set | *** % | ISO 815 | 70°C, 22 hr, Post-cured |
Rebound Resilience | *** % | ASTM D 2632 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A | |
Glass Transition Temperature | *** °C | Internal | DMA |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
