High-strength and stiffness parts with low creep. Improved friction and wear behaviour. Optimised for dry running operations. Electrically conductive, suitable for continuous discharging of statically-generated electricity. High continuous-use and heatdistortion temperatures. Non flammable.
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessHeat ResistanceElectrically ConductiveWear/Abrasion ResistanceLow Friction/WearLubricatedCreep ResistantFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlack | |||
| Reinforced | Carbon FiberPTFECarbon Fiber+PTFE | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr, 25°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 23°C |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** Mpa | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 23°C |
Flexural Strain | |||
- | *** % | ASTM D 790 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate A (50°C/h) |
Continuous Use Temperature | |||
Long term | *** °C | UL 746B | |
Temperature at Short Circle Operation | *** °C | Internal | During Lifetime Max. 200 hr |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | *** Ohm | ASTM D257 | ROB |
Insulation Resistance | *** Ohm | ASTM D257 | Strip Electrode R25 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
