NOTIO™ is a flexible, low density, transparent elastomer with excellent heat resistance. The resin is not cross- linked and demonstrates superior elasticity. NOTIO's crystalline and amorphous structure (morphology) is controlled at the nano scale, allowing for the realization of properties that cannot be achieved with conventional elastomers.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceLow Density | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | JIS K7113 | |
Tensile Strength | |||
Break | *** Mpa | JIS K7113 | |
Tensile Elongation | |||
Break | *** % | JIS K7113 | |
Compression Set | *** % | Internal | 23°C, 24 hr |
Compression Set | *** % | Internal | 70°C, 24 hr |
Tensile Set | *** % | Internal | Permanent set, 0.3mm, 150% expansion |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Glass Transition Temperature | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | Internal | thickness 2mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
