MILASTOMER™ has superior lightness, rubber elasticity,heat resistance,cold resistance,weatherability,chemical resistance,electrical insulation performance and outstanding secondary processability characteristics such as coating performance, thermal adhesiveness and vacuum forming performance.
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturHeat ResistanceWeather ResistanceChemical ResistanceOil ResistantLow Density | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | InjectionBlow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
230℃/10 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 37 | 500 mm/min |
at 100% strain | *** Mpa | ISO 37 | 500 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 37 | 500 mm/min |
Compression Set | *** % | ISO 815 | 70°C, 22 hr |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
