STAMAX™ 30YH570 is a high flow, halogen free flame redardant, copolymer with 30% long glass fiber, developed for E&E and automotive injection molded applications. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.This material has been designed to combine a good performance profile with good processing.
STAMAX™ 30YH570 should be dried at 100°C for 2 hours before the injection molding.
IMDS ID: 717262968
| Original Document | Technical Datasheet(English) | |||
| Solutions | Side Crash Absorbers for EV Battery PacksModule Boxes for EV Battery PacksEnd Plate for EV Battery Package SystemsCooling Plates for EV Battery PacksBus Bar Plate for EV Battery Package SystemsBattery Trays for EV Battery PacksBattery Covers for EV Battery PacksAero Shields for EV Battery Packs | |||
| Features | High StrengthHigh Stiffness/RigidityFlame RetardantHalogen FreeHigh FlowFilled & Reinforced | |||
| Additive | Chemically CoupledFlame Retardant | |||
| Processing | Injection | |||
| Technical Notes | Flame Retardant | |||
| Reinforced | 30% Long Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Filled/Ash | *** % | ISO 3451 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527/1A | at 23 °C |
Tensile Modulus | *** Mpa | ISO 527/1A | at 80 °C |
Tensile Strength | |||
- | *** Mpa | ISO 527/1A | at 23 °C |
- | *** Mpa | ISO 527/1A | at 80 °C |
Tensile Elongation | |||
Break | *** % | ISO 527/1A | at 23 °C |
Flexural Modulus | *** Mpa | ISO 178 | at 23 °C |
Flexural Modulus | *** Mpa | ISO 178 | at 80 °C |
Flexural Strength | |||
- | *** Mpa | ISO 178 | at 23 °C |
- | *** Mpa | ISO 178 | at 80 °C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75/A | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359-2 | -30 °C to 100 °C |
Ball Pressure Test | *** °C | IEC 60695-10-2 | PASS |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-2 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | |||
0.8mm | *** °C | IEC 60695-2-12 | |
1.6mm | *** °C | IEC 60695-2-12 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
