SKYTRA 5220F is corresponding to FR PET GF 30% grade of Dupont in terms of mechanical and electrical properties with flammability, and get customer’s attention in the E&E market with UL certifications (V0, RTI, and CTI, etc).
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantFilled & Reinforced | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | |
Across Flow | *** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** kg/cm² | ASTM D638 | 5mm/min |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 5mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 5mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 1.27mm/min |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 1.27mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.2 mm |
23℃ (73℉) | *** J/m | ASTM D256 | 6.4 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Relative Temperature Index(RTI), Imp | |||
3.0/3.2 mm | *** °C | UL 746 | |
Relative Temperature Index(RTI), Elec | |||
3.0/3.2 mm | *** °C | UL 746 | |
Relative Temperature Index(RTI), Str | |||
3.0/3.2 mm | *** °C | UL 746 | |
Ball Pressure Test | *** °C | IEC 60695-10-2 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
5VA | *** mm | UL94 | |
Glow Wire Ignition Test(GWIT) | |||
3.0mm | *** °C | IEC 60695-2-13 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Comparative Tracking Index (CTI) | |||
- | ***~*** V | UL 746A |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
