SKYPEL P142DF is a thermoplastic polyester elastomer resin superior heat resistance. SKYPEL P142DF with a medium 42D hardness based on shore D scale is widely used for injection molding and extrusion applications. And SKYPEL P142DF is also available to overmold TPU, PC, ABS, PC/ABS alloys.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat Resistance | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24hr |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** kg/cm² | ASTM D638 | |
at 5% strain | *** kg/cm² | ASTM D 638 | |
at 10% strain | *** kg/cm² | ASTM D 638 | |
at 100% strain | *** kg/cm² | ASTM D 638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Tear Strength | *** kN/m | ASTM D 1004 | 2mm thick. Crosshead speed 51mm/min |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ASTM D 2240 | 15s |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ASTM D3418 | 10℃/min |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
