Suitable to produce injection-molded MIDs using the LDS (Laser Direct Structuring) technology developed by LPKF Laser & Electronics AG.
Advantages of the LDS technology:
1. High design flexibility and integration of circuits on structural parts
2. Suitable for small/curved surfaces and thin-walled parts
3. Size reduction: distance between 2 circuit lines less than 100 μm possible
4. Cost reduction by using LPKF Fusion 3D laser
We have the broadest portfolio of materials suitable for the LDS, covering the entire temperature range, including the demanding reflow soldering at 260degC.
Available grades:
For Low temperature applications (No or Special Soldering): XANTAR™ and Iupilon™ (PC/ABS & PC)
For High temperature applications (Reflow Soldering): Reny™ (PA-MXD6)
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Laser Direct StructuringFilled & Reinforced | |||
| Appearance | White | |||
| Processing | 3D Printing | |||
| Reinforced | 10% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Volume Flow Rate(MVR) | |||
270°C/5.0 kg | *** cm³/10 min | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flexural Modulus | *** Mpa | Internal | |
Flexural Strength | |||
- | *** Mpa | Internal | |
Flexural Strain | |||
- | *** % | Internal | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | Internal | |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
