DOMAMID® H40 L is a natural high quality lubricated polyamide 6 granulates and it is well suited for film extrusion applications.
DOMAMID® H40 L is hygroscopic and will absorb moisture when exposed to high moisture content areas. The processing characteristics of the product will change if the moisture content increases. Certificates for all conformities, for example the food legislation of DOMAMID® H40 L with respect to the FDA requirements, 21 CFR 177-1500, EU Regulation 10/2011 and for other countries, will be provided on request.
| Original Document | Technical Datasheet(English) | |||
| Features | Lubricated | |||
| Additive | Lubricant | |||
| Appearance | SpheresNatural ColorOpaque ColorWhite | |||
| Processing | ExtrusionFilm Extrusion | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Viscosity | *** - | ISO 307 | 1% (w/v) PA-6 in 96% (w/w) H2 S04 , 20 °C |
Bulk(Apparent ) Density | ***~*** g/cm³ | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | Injection, dry |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | Injection, dry |
Tensile Elongation | |||
Break | *** % | ISO 527 | Injection, dry |
Flexural Modulus | *** Mpa | ISO 178 | Injection, dry |
Flexural Strength | |||
- | *** Mpa | ISO 178 | Injection, dry |
Coefficient of Friction | *** - | ISO 8295 | Dynamic |
Coefficient of Friction | *** - | ISO 8295 | Static |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | Film |
Haze | *** % | ASTM D1003 | Film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | MD, 23 °C/50 % RH |
- | *** Mpa | ISO 527 | TD, 23 °C/50 % RH |
Tensile Elongation | |||
Break | *** % | ISO 527 | MD, 23 °C/50 % RH |
Break | *** % | ISO 527 | TD, 23 °C/50 % RH |
Tensile Modulus | *** Mpa | ISO 527 | MD, 2 % Secant, 23 °C/50 % RH |
Piercing strength | *** N | ASTM F 1306 | 23 °C/50 % RH |
Water Vapor Transmission Rate | *** g/m²/24 hr | DIS 15106-1/-3 | 23 °C/85 % RH |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | 23 °C/0 % RH |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | 23 °C/85 % RH |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
