Also valid for material labelled as AM Material: AM. FPU 77D 000000 X1010. Additive manufacturing Thermoplastic Polyurethane grade for filament extrusion. Aromatic ether-based type; tough and rigid; transparent.
| Original Document | Technical Datasheet(English) | |||
| Features | Good SurfaceGood Adhesion | |||
| Appearance | Natural ColorClear/Transparent | |||
| Processing | Fused Filament Fabrication (FFF)3D Printing | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Abrasion resistance | *** mm³ | ISO 4649 | method A |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | xy-direction, 1 mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | xy-direction, 200 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | xy-direction, 200 mm/min |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 7619-1 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10 N, 50 °C/h |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
