Additive manufacturing grade for filament extrusion.
Aliphatic ether/ester type; hydrolysis resistance; no yellowing; good low-temperature flexibility.
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturGood FlexibilityHydrolysis Resistance | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Fused Filament Fabrication (FFF)3D Printing | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | xy-direction, 1 mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | xy-direction, 200 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | xy-direction, 200 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180/1A | xy-direction |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | ***~*** A | ISO 7619-1 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Glass Transition Temperature | *** °C | ISO 6721 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
