Hydrogenated Styrenic Thermoplastic Elastomer (SEBS) S.O.E.™ S1611
Asahi Kasei S.O.E.™ S1611 is a special SEBS with low resilience. It is particularly used as a modifier to lower resilience and enhance shock absorption of foam made from EVA or TPO for shoe mid soles, sports gears or sports wears.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Appearance | Pellets/Granules | |||
| Processing | Compounding | |||
| Compliance | EU 2011/10/EC | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | Dumbbell: Type 1A 500 mm/min |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
- | *** % | ISO 37 | Dumbbell: Type 1A 500 mm/min |
Rebound Resilience | *** % | BS 903 | 23°C |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
