Hydrogenated Styrenic Thermoplastic Elastomer (SEBS) Tuftec™ H1521
Asahi Kasei Tuftec™ H1521 is particularly designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1521 super-finely dispersed into PP. PP and H1521 blends provides transparent and flexible extruded products such as sheets, films and tubes. The blends are also applicable to injection molding due to its high MFR. It has excellent adhesion, which is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1521 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good AdhesionMedical Application/Health CareGood FlowSoft | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | InjectionExtrusionCompounding | |||
| Compliance | Drug Master FileEU 2011/10/ECFDAUSP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | Dumbbell: Type 1A 500 mm/min |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
- | *** % | ISO 37 | Dumbbell: Type 1A 500 mm/min |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
