PolyBlend is a family of exceptionally soft, aromatic polyurethane elastomeric alloys, which can be used as a substitute for natural rubber or latex in many applications.
These polymers encompass unique characteristics such as low flexural modulus, moderate tensile strength, and high elongation, in addition to allowing for a high draw-down ratio due to its superior melt strength and chemical integrity.
PolyBlend can be processed on conventional extrusion or injection molding equipment and is available in hardnesses ranging from 45 Shore A to 80 Shore A.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Medical Application/Health CareBiocompatible | |||
| Processing | InjectionExtrusion | |||
| Compliance | ISO10993 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Mass Flow Rate(MFR) | |||
- | ***~*** g/10min | ASTM D1238 | 190º – 205° C/ 2.16 – 8.26 kg |
Water Absorption | ***~*** % | ASTM D570 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | ***~*** psi | ASTM D638 | |
at 50% strain | ***~*** psi | ASTM D 638 | |
at 100% strain | ***~*** psi | ASTM D 638 | |
at 200% strain | ***~*** psi | ASTM D 638 | |
at 300% strain | ***~*** psi | ASTM D 638 | |
Tensile Elongation | |||
Break | ***~*** % | ASTM D638 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
