Chemraz® 592, a versatile perfluoroelastomer developed with a proprietary filler system, is very resistant to plasma attack. This compound’s durometer allows for some hardware finish inconsistency and higher sealing loads. It is well suited for critical seals in static and dynamic dry applications where reliability and purity are equally essential. Chemraz® 592 is recommended for applications with service temperatures up to 464°F (240°C).
Features and Benefits
• Excellent physical properties
• Inert mineral filler system provides excellent resistance to plasma attack
• Good static and dynamic performance
Applications
• Slit valve seals • Lid seals • Endpoint windows • Valve seals • Window seals• Isolator valve seals • Gas inlet seals • Bell jar seals • KF fitting seals
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistancePlasma resistanceChemical ResistanceFilled & Reinforced | |||
| Appearance | White | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D297 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D1414 | |
at 50% strain | *** Mpa | ASTM D1414 | |
at 100% strain | *** Mpa | ASTM D1414 | |
Tensile Elongation | |||
- | *** % | ASTM D1414 | |
Compression Set | *** % | ASTM D 395 | 204°C, 70 hr, 25% Deflection |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Continuous Use Temperature | |||
Long term | ***~*** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
