PTFE, Thermoplastic & Carbon Filled, Lubricated
| Original Document | Technical Datasheet(English) | |||
| Features | Wear/Abrasion ResistanceLow Friction/WearLubricatedFilled & Reinforced | |||
| Additive | Lubricant | |||
| Appearance | Black | |||
| Reinforced | Carbon FiberFiller | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D1457 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D4745 | |
Tensile Elongation | |||
- | *** % | ASTM D4745 | |
Coefficient of Friction | ***~*** - | ASTM D 3702 | Dynamic |
Coefficient of Friction | ***~*** - | ASTM D 3702 | Static |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM D 3702 | |
Shear Strength | *** Mpa | ASTM D 732 | 121°C |
Shear Strength | *** Mpa | ASTM D 732 | 149°C |
Shear Strength | *** Mpa | ASTM D 732 | 204°C |
Shear Strength | *** Mpa | ASTM D 732 | 27°C |
Shear Strength | *** Mpa | ASTM D 732 | 66°C |
Shear Strength | *** Mpa | ASTM D 732 | 93°C |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | ***~*** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Deformation | *** % | ASTM D621 | 13.8 MPa, 26°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
