Greene Tweed offers precision plastic components for a variety of demanding, semiconductor applications. These components are made from a full range of high-performance plastic materials, including Arlon® 1330. Ideal for applications requiring exceptional wear resistance and chemical compatibility, Arlon® 1330 provides good dimensional stability without the addition of carbon fibers.
Features and Benefits
• Excellent chemical compatibility
• Low extractables
• Good dimensional stability
• Superior wear properties
Applications
• CMP retainer Rings
• Guides
• Supports
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceWear/Abrasion ResistanceLow Friction/WearDimensional StabilityChemical ResistanceLow ExtractablesFilled & Reinforced | |||
| Appearance | Pellets/GranulesBrown | |||
| Processing | Injection | |||
| Reinforced | PTFE | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Water Absorption | *** % | ASTM D570 | 24 Hours |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 0.5% Secant |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
Coefficient of Friction | *** - | ASTM G77 | PV=12,600 psi ft/min |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM G77 | |
Shear Strength | *** Mpa | ASTM D 732 | |
Shear Strength | *** Mpa | ASTM D 732 | Axial, 232°C |
Shear Strength | *** Mpa | ASTM D 732 | Axial, Room Temperature |
Compressive Strength | *** Mpa | ASTM D 695 | Break |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
Izod Unnotched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 cm/cm/℃ | ASTM D 696 | Above 149°C |
- | *** E-6 cm/cm/℃ | ASTM D 696 | Below 149°C |
Melt Temperature(Tm) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
