Primary Industry
-Energy Upstream
-Energy Downstream
-Semiconductor
-Medical
Description/Primary Uses
• Carbon-filled PEEK
• Wear rings and bushings
• Back-up rings
• CMP retainer rings
• Supports
• Guides
• Wafer handling robot end effector pads
Features & Benefits
• High physical properties
• Excellent wear resistance and chemical compatibility
• Impact resistant
• High performance over wide range of operating conditions
| Original Document | Technical Datasheet(English) | |||
| Features | Good Impact ResistanceHeat ResistanceFlame RetardantWear/Abrasion ResistanceMedical Application/Health CareChemical ResistanceFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Reinforced | Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 0.5% Secant |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 0.5% Secant |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
Coefficient of Friction | *** - | ASTM G77 | PV = 12600 psi-ft/min |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM G77 | |
Shear Strength | *** Mpa | ASTM D 732 | Axial |
Shear Strength | *** Mpa | ASTM D 732 | Transverse |
Compressive Strength | *** Mpa | ASTM D 695 | Break |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 cm/cm/℃ | ASTM D 696 | Above 149°C |
- | *** E-6 cm/cm/℃ | ASTM D 696 | Below 149°C |
Deformation | *** % | ASTM D621 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
