block-PP/LCP 10%
High dispersion grade
| Original Document | Technical Datasheet(Japanese&English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | Internal | |
Mold Shrinkage | |||
Flow | *** % | Internal | 80mm×2mmt |
Across Flow | *** % | Internal | 80mm×2mmt |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
- | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | Internal | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | Internal | -30～30°C |
Across Flow | *** E-6/°C | Internal | -30～30°C |
Melt Temperature(Tm) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
