A fluororesin suitable for compound with additives such as carbon.
Introduction
- POLYFLON M-18F is a polytetrafluoroethylene virgin granular fine cut resin.
- Compressing the powder and sintering are a general method for use due to its high melt viscosity.
- Suitable for compound material with additives such as carbon.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Powder | |||
| Processing | Sintering | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D4894 | |
Mold Shrinkage | |||
- | *** % | Internal | 50Φ × 50h |
Particle Size | *** micrometer | ASTM D4894 | Average |
Bulk(Apparent ) Density | *** g/cm³ | ASTM D4894 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D4894 | |
Tensile Elongation | |||
- | *** % | ASTM D4894 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ASTM D4894 | Initial |
Melt Temperature(Tm) | *** °C | ASTM D4894 | Second |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
