NEOFLON PCTFE M-400H is a high hardness fluororesin with excellent gas barrier properties.
Introduction
- NEOFLON PCTFE M-400H is a polymer with a structure in which all hydrogen atoms of polyvinyl chloride (CH2 --CHCl) n are substituted with fluorine atoms. It is in the form of one chlorine atom in PTFE structural unit. - Highly transparent due to this chlorine atom.
- It is a fluororesin with the highest gas barrier property and high hardness.
- Excellent in mechanical properties, although it is slightly inferior to PFA and FEP in heat resistance and chemical resistance.
- M-400H is a granular material with a higher molecular weight than M-300H.
- It is excellent in stress crack resistance, suitable for compression molding.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceESCRChemical ResistanceHigh Barrier property/Low permeation | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Compression Moulding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
- | *** cm³/10 min | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 1708 | |
Tensile Elongation | |||
- | *** % | ASTM D1708 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
