NEOFLON EFEP RP5000 is a fluoropolymer that has chemical resistance and the capability to adhere to the other materials. It has a good chemical resistance as ETFE at the same time.
Introduction
- NEOFLON EFEP RP-5000 which owns low melting point is a copolymer of ETFE and additional third monomer.
- Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding.
- Hot melt adhesion to the other plastics such as Polyamide with its reactive group.
- Excellent process ability and the good chemical resistance as ETFE.
- It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.
| Original Document | Technical Datasheet(English) | |||
| Features | Easy processingGood AdhesionChemical Resistance | |||
| Processing | InjectionExtrusionCompression Moulding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
265°C/5.0 kg | *** g/10 min | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D3159 | |
Tensile Elongation | |||
- | *** % | ASTM D3159 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ASTM D3159 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
