Applications:
-Luggage, Plastic crate, Chairs, Jars, Containers
Features:
-Injection Molding, High flow, High impact resistance, Low impact whitening
| Original Document | Technical Datasheet-ASTM(Chinese&English) | |||
| Features | High ImpactStress Whitening ResistantHigh Flow | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | 23℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 23 ℃ |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23 ℃ |
Flexural Modulus | *** Mpa | ASTM D790 | 23 ℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** J/m | ASTM D256 | 1/8"bar |
23℃ (73℉) | *** J/m | ASTM D256 | 1/8"bar |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 23 ℃ |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
- | *** °C | ASTM D 648 | Unannealed, 1/4" bar |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
