Applications:
-Food packaging, Packaging containers, Transparent, Thin-walled products
Features:
-Injection Molding, Excellent dimensional stability and good impact resistance
| Original Document | Technical Datasheet-ASTM & ISO(Chinese&English) | |||
| Features | Good Impact ResistanceDimensional StabilityFood Contact | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | 23℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 23 ℃ |
Yield | *** Mpa | ISO 527 | 23 ℃ |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23 ℃ |
Flexural Modulus | *** kg/cm² | ASTM D790 | 23 ℃ |
Flexural Modulus | *** Mpa | ISO 178 | 23 ℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** J/m | ISO 180 | 1/8"bar |
-20℃ (-4℉) | *** kg·cm/cm | ASTM D256 | 1/8"bar |
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 1/8"bar |
23℃ (73℉) | *** J/m | ISO 180 | 1/8"bar |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 23 ℃ |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
- | *** °C | ASTM D 648 | Unannealed, 1/4" bar |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
