Applications:
-Electric appliance parts,RTI=125℃
Features:
-Long term heat resistance,High stiffness,Good luster
| Original Document | Technical Datasheet-ASTM & ISO(Chinese&English) Technical Datasheet-ASTM & ISO(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceHigh GlossHomopolymer | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
- | ***~*** % | ISO 2577 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 23 ℃ |
Yield | *** Mpa | ISO 527 | 23 ℃ |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23 ℃ |
Break | *** % | ISO 527 | 23 ℃ |
Flexural Modulus | *** kg/cm² | ASTM D790 | 23 ℃ |
Flexural Modulus | *** Mpa | ISO 178 | 23 ℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 1/8"bar |
23℃ (73℉) | *** J/m | ISO 180 | 1/8"bar |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 23 ℃ |
Rockwell R | *** R | ISO 2039 | 23 ℃ |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed, 1/4" bar |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | Unannealed, 1/4" bar |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | All Color |
HB | *** mm | UL94 | All Color |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
