Advantages
- Impact Strength, Thermoformability
Major Applications
- Sheet, Blow bottle
| Original Document | Technical Datasheet(Chinese&English) | |||
| Features | High ImpactEasy processingCopolymer | |||
| Processing | ExtrusionSheet ExtrusionBlow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | JIS K7210 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | JIS K7161 | |
Tensile Strength | |||
Yield | *** Mpa | JIS K7161 | |
Tensile Elongation | |||
Nominal Tensile Strain at Break | *** % | JIS K7161 | |
Flexural Modulus | *** Mpa | JIS K7171 | |
Flexural Strength | |||
- | *** Mpa | JIS K7171 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | JIS K7111 | |
23℃ (73℉) | *** kJ/m² | JIS K7111 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | JIS K7202 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | JIS K7191 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
