Characteristics
Lubricant grade of AX-1500, excellent in heat and chemical resistances
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Heat ResistanceLow Friction/WearChemical Resistance | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | Internal | 3mm |
Across Flow | *** % | Internal | 3mm |
Water Absorption | *** % | ASTM D570 | 3.18mm, 24hrs |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
- | *** Mpa | ASTM D 638 | equilibrium moisture absorption |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Break | *** % | ASTM D638 | equilibrium moisture absorption |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Modulus | *** Mpa | ASTM D790 | equilibrium moisture absorption |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
- | *** Mpa | ASTM D790 | equilibrium moisture absorption |
Coefficient of Friction | ***~*** - | Internal | |
Wear Factor | *** E-6 mm³/Nm | Internal | |
PV Limit | *** MPa-m/s | Internal | |
Compressive Strength | *** Mpa | ASTM D 695 | Yield |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | 3.18mm |
- | *** J/m | ASTM D 256 | equilibrium moisture absorption |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 cm/cm/℃ | ASTM D 696 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | equilibrium moisture absorption |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | equilibrium moisture absorption |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D150 | equilibrium moisture absorption |
Dielectric Strength | *** kV/mm | ASTM D149 | equilibrium moisture absorption |
Arc Resistance | *** sec | ASTM D495 | equilibrium moisture absorption |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
