Ixef® BXT 2000-0203 resin was developed specifically for extrusion and blow-molding processes. Unlike grades targeted for injection molding, Ixef® BXT 2000-0203 resin can be successfully extruded into tube, pipe, sheet and film and blow-molded into various profiles.
BXT 2000-0203 resin has proven permeation resistance to most automotive fluids and fuels. It also offers low moisture absorption, excellent dimensional stability, and chemical resistance as well as outstanding mechanical properties.
Natural: Ixef® BXT 2000-0203
| Original Document | Technical Datasheet(English) | |||
| Features | Dimensional StabilityCreep ResistantChemical ResistanceFuels ResistantHigh FlowLow Moisture AbsorptionHigh Barrier property/Low permeation | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | ExtrusionSheet ExtrusionProfile ExtrusionFilm ExtrusionTube ExtrusionBlow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | Internal | 240℃ |
Bulk(Apparent ) Density | *** g/cm³ | ASTM D 1895 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Yield | *** Mpa | ISO 527-2 | |
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | |
Yield | *** % | ISO 527-2 | |
Break | *** % | ASTM D638 | |
Nominal Tensile Strain at Break | *** % | ISO 527-2 | |
Modulus of Elasticity | *** Mpa | ASTM D 638 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
- | *** kJ/m² | ISO 180 | |
Izod Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
- | *** J/m | ASTM D 4812 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Melt Temperature(Tm) | *** °C | Internal | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Permeability | *** g·mm/m²/atm/24 hr | SAE J2659 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
