Ixef® BM-1524 is a 50% glass-fiber reinforced, halogen-free flame retardant polyarylamide developed for aircraft cabin interior applications that require high strength and stiffness, good surface finish, low moisture absorption, and excellent chemical and creep resistance.
This product is qualified under Boeing BMS8-270 Rev. L, Type I, Class 6, Form B, Grade 50 and meets the FAA 60-second vertical burn requirements per 14 CFR 25.853 Appendix F and toxic gas emission requirements per BSS7239 and ABD0031.
Natural: Ixef® BM-1524 NT 000
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHigh Stiffness/RigidityFlame RetardantHalogen FreeBr- FreeGood SurfaceDimensional StabilityCreep ResistantChemical ResistanceHigh FlowLow Moisture AbsorptionFilled & Reinforced | |||
| Additive | Flame Retardant | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Injection | |||
| Compliance | FAA FARRoHS | |||
| Reinforced | 50% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | |
Water Absorption | *** % | - | Equilibrium |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
Yield | *** Mpa | ASTM D790 | |
Compressive Modulus | *** Mpa | ASTM D 695 | |
Compressive Strength | *** Mpa | ASTM D 695 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | ALL |
Oxygen Index | *** % | ISO 4589 | |
Glow Wire Ignition Test(GWIT) | |||
0.4mm | *** °C | IEC 60695-2-13 | |
0.75mm | *** °C | IEC 60695-2-13 | |
1.5mm | *** °C | IEC 60695-2-13 | |
3.0mm | *** °C | IEC 60695-2-13 | |
Vertical Burn | *** sec | - | 60 second (8.89 cm |
Toxicity | *** ppm | BSS 7239/ATS 1000/ABD 0031 | CO |
Toxicity | *** ppm | BSS 7239/ATS 1000/ABD 0031 | HCL |
Toxicity | *** ppm | BSS 7239/ATS 1000/ABD 0031 | HCN |
Toxicity | *** ppm | BSS 7239/ATS 1000/ABD 0031 | HF |
Toxicity | *** ppm | BSS 7239/ATS 1000/ABD 0031 | NO + NO2 |
Toxicity | *** ppm | BSS 7239/ATS 1000/ABD 0031 | SO2 |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
2.4 GHz | *** - | ASTM D2520 | |
Dissipation Factor | |||
2.4 GHz | *** E-4 | ASTM D2520 | |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | |
- | PLC | UL 746A | 3.00 mm |
- | *** V | UL 746A | 3.00 mm |
High Voltage Arc Tracking Rate(HVTR) | PLC | UL 746A | 3.0 mm |
Hot Wire Ignition(HWI) | *** PLC | UL 746A | 0.4 mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 0.4 mm |
Hot Wire Ignition(HWI) | PLC | UL 746A | 0.75 mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 0.75 mm |
Hot Wire Ignition(HWI) | PLC | UL 746A | 1.5 mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 1.5 mm |
Hot Wire Ignition(HWI) | PLC | UL 746A | 3.0 mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 3.0 mm |
High Ampere Arc Ignition(HAI) | *** PLC | UL 746A | 0.4 mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 0.4 mm |
High Ampere Arc Ignition(HAI) | *** PLC | UL 746A | 0.75 mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 0.75 mm |
High Ampere Arc Ignition(HAI) | *** PLC | UL 746A | 1.5 mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 1.5 mm |
High Ampere Arc Ignition(HAI) | *** PLC | UL 746A | 3.0 mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 3.0 mm |
High Voltage Arc Resistance to Ignition(HVAR) | PLC | UL 746A | 3.0 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
