Ixef® 1022 is a 50% glass-fiber reinforced, general purpose polyarylamide compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.
Natural: Ixef® 1022/0008
Black: Ixef® 1022/9008
Color upon request
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHigh Stiffness/RigidityGood SurfaceDimensional StabilityCreep ResistantChemical ResistanceHigh FlowLow Moisture AbsorptionFilled & Reinforced | |||
| Appearance | Pellets/GranulesColors AvailableNatural ColorBlack | |||
| Processing | Injection | |||
| Compliance | RoHS | |||
| Reinforced | 50% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294-4 | |
Water Absorption | *** % | ISO 62 | 24 hr, 23°C |
Water Absorption | *** % | - | Equilibrium, 23°C, 50% RH |
Water Absorption | *** % | - | Equilibrium, 65% RH |
Water Absorption | *** % | - | Saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | |
Tensile Modulus | *** Mpa | ISO 527-1 | Conditioned |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2 | |
Break | *** Mpa | ISO 527-2 | Conditioned |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Break | *** % | ISO 527-2 | Conditioned |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
- | *** kJ/m² | ISO 179 | Conditioned |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
- | *** kJ/m² | ISO 179 | Conditioned |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
Izod Unnotched Impact Strengh | |||
- | *** J/m | ASTM D 4812 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
Oxygen Index | *** % | ISO 4589 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 60093 | |
Dielectric Constant(Permittivity) | |||
110Hz | *** - | IEC 60250 | |
Dissipation Factor | |||
- | *** E-4 | IEC 60250 | |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | |
- | *** V | IEC 60112 | Conditioned |
Dielectric Strength | *** kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
| Chinese | English | File Format | Action |
|---|---|---|---|
| 物性表(英文) | Technical Datasheet(English) | Down Load |
| Supplier | Price | Region | Message | Contact |
|---|
| Group | Value |
|---|
