Celazole® TF-60C is a carbon-reinforced blend, ideal for parts that require high strength, very low creep, and deflection resistance. A great match for planetary gears, office equipment, semiconductor, electronic and mechanical applications.
Celazole® T-Series products are PBI compounds designed for injection molding and extrusion. Combining the superior mechanical properties and thermal resistance of PBI with the melt process ability of polyaryletherketones (PEEK or PEKK), these products offer cost-effective high performance. These products are available in pellet form.
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHeat ResistanceCreep ResistantFilled & Reinforced | |||
| Appearance | Pellets/Granules | |||
| Processing | InjectionExtrusion | |||
| Reinforced | Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Water Absorption | *** % | ASTM D570 | 24 hours @ 23°C |
Water Absorption | *** % | ASTM D570 | Equilibriu |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
Poisson Ratio | *** - | - | |
Compressive Modulus | *** Mpa | ASTM D 695 | |
Compressive Strength | *** Mpa | ASTM D 695 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell A | *** A | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Specific Heat | *** J/kg/°C | DSC | 70°C |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | TMA | 25-150°C |
Thermal Conductivity | *** W/m-°C | ASTM F433 | 25°C |
Weight Loss Temperature | *** °C | TGA | Air, 5% Weight Loss |
Weight Loss Temperature | *** °C | TGA | Nitrogen, 5% Weight Loss |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
