Celazole® TU-60 is a high performance unfilled blend, ideal for applications requiring no fillers. This material works well for complex geometries and offers the best process ability. It is ideal for lamp sockets, connectors and backup seals.
Celazole® T-Series products are PBI compounds designed for injection molding and extrusion. Combining the superior mechanical properties and thermal resistance of PBI with the melt process ability of polyaryletherketones (PEEK or PEKK), these products offer cost-effective high performance. These products are available in pellet form.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFlame RetardantChemical Resistance | |||
| Appearance | Pellets/Granules | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Water Absorption | *** % | ASTM D570 | Equilibrium |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
- | *** % | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
Compressive Modulus | *** Mpa | ASTM D 695 | |
Compressive Strength | *** Mpa | ASTM D 695 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell A | *** A | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | TMA | 200-300°C |
- | *** E-6/°C | TMA | 25-150°C |
Weight Loss Temperature | *** °C | TGA | Air, 5% Weight Loss |
Weight Loss Temperature | *** °C | TGA | Nitrogen, 5% Weight Loss |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
1 kHz | *** - | ASTM D 150 | |
10 kHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
1 kHz | E-4 | ASTM D 150 | |
10 kHz | *** E-4 | ASTM D 150 | |
Dielectric Strength | *** kV/mm | ASTM D149 | |
Arc Resistance | *** sec | ASTM D495 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
