APICAL is a ultra-heat-resistant polyimide film that has been developed through our own studies using a wealth of our unique high polymer technologies.
APICAL AH: General grade
APICAL NPI: Superior dimensional stability grade
APICAL AH: Heat Sealable grade by FEP
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFlame RetardantDimensional StabilityChemical Resistance | |||
| Appearance | Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 20 ºC 24hr |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Poisson Ratio | *** - | - | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Relative Temperature Index(RTI), Elec | |||
- | *** °C | UL 746B | |
Relative Temperature Index(RTI), Str | |||
- | *** °C | UL 746B | |
Specific Heat | *** J/kg-K | DSC | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | TMA | MD, 100~200 ºC |
- | *** E-6/°C | TMA | TD, 100~200 ºC |
Glass Transition Temperature | *** °C | DSC | |
Thermal Conductivity | *** W/(m K) | Laser flash Method | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | IPC-TM-650 | |
Dissipation Factor | |||
- | *** E-4 | IPC-TM-650 | |
Dielectric Strength | *** kV/mm | ASTM D149 | 60Hz, 20 ºC |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D882 | MD, 20 ºC |
- | *** Mpa | ASTM D882 | TD, 20 ºC |
Tensile Elongation | |||
- | *** % | ASTM D882 | MD, 20 ºC |
- | *** % | ASTM D882 | TD, 20 ºC |
Tensile Modulus | *** Mpa | ASTM D 882 | MD, 20 ºC |
Tensile Modulus | *** Mpa | ASTM D 882 | TD, 20 ºC |
Water Vapor Transmission Rate | *** g/m²/24 hr | JIS Z 0208 | 25µm, 40 ºC, 90% |
Free/Heat Shrinkage | *** % | IPC-TM-650 | MD, 200 ºC, 2hr |
Free/Heat Shrinkage | *** % | IPC-TM-650 | TD, 200 ºC, 2hr |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
