Sereebo® P series LCF grade is long carbon fiber reinforced hi-strength and hi-rigidity polycarbonate resin for injection molding. The merit for which LCF grade is used is cost cutting by weight saving and conductive coating less.
Features include the following points.
1.Hi-Strength & Hi-rigidity
2.Good appearance
3.Good EMC property
4.Good dimensional property
5.Good paintability
Application
Sereebo® P Series LCF are expected to be applied as follows.
1.Replacement of metal
2.Weight saving
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | High StrengthHigh Stiffness/RigidityEMI/RFI ShieldingGood SurfaceDimensional StabilityGood PaintablilityFilled & Reinforced | |||
| Appearance | Pellets/Granules | |||
| Reinforced | Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | Internal | |
Across Flow | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 5mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | 5mm/min |
Tensile Elongation | |||
- | *** % | ISO 527-2 | 5mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 2mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359-2 | -50℃~100℃ |
Across Flow | *** E-6/°C | ISO 11359-2 | -50℃~100℃ |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | |
Surface Resistivity | *** Ohm | IEC 60093 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
