We are the developer and manufacturer of KRYSTALFLEX® TPU films, based on aliphatic elastomers, which are well known for their performance in safety glazing applications. Helping to set the standard for interlayer laminating films, our KRYSTALFLEX® TPU films are trusted to create impact resistant laminated glass that is tough enough for use in extreme environments.
Typical applications:
• Aerospace • High-speed rail • Military vehicles • Antiballistic glazing • Building security.
Film properties:
• Low temperature impact resistance • Excellent adhesion to glass, polycarbonate (PC) and polymethylmethacrylate (PMMA) • Moisture resistance • Low lamination temperature compatible with PMMA • Lamination possible, even with complex surfaces with double degree of curvature.
Our KRYSTALFLEX® TPU films are available in a variety of thicknesses (0.38 to 1.27 mm) and roll widths (0.6 to 2.0 m) - meaning we can find a solution to best suit your glazing application. We also offer a range of KRYSTALFLEX® PE 900 TPU edge seals available in widths ranging from 10 to 140 mm.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | DIN 53515 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | DIN 53505 | |
Shore D hardness | *** D | DIN 53505 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Glass Transition Temperature | *** °C | ASTM D5026 | |
Thermo mechanical analysis | *** °C | Internal | TMA high melt range |
Thermo mechanical analysis | *** °C | Internal | TMA low melt range |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Adhesion Strength | *** N/mm | ASTM D3167 | 113 °C, Lamination, TO GLASS |
Adhesion Strength | *** N/mm | ASTM D3167 | 118 °C, Lamination, TO GLASS |
Adhesion Strength | *** N/mm | ASTM D3167 | 127 °C, Lamination, TO GLASS |
Adhesion Strength | *** N/mm | ASTM D3167 | 85 °C, Lamination, TO GLASS |
Adhesion Strength | *** N/mm | ASTM D3167 | 91 °C, Lamination, TO GLASS |
Adhesion Strength | *** N/mm | ASTM D3167 | 99 °C, Lamination, TO GLASS |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
