P Series
Polyether-based TPUs for applications where microbial and hydrolysis resistance are required
Key performance features
Using our IROGRAN® TPU range, manufacturers of technical parts can achieve the highest levels of: • Wear and tear strength • Dimensional stability • Oil resistance • Low compression set • Dynamic load performance • Elasticity and flexibility • Temperature performance • Processing consistency
| Original Document | Technical Datasheet(English) | |||
| Features | AntimicrobialHydrolysis Resistance | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
Abrasion resistance | *** mm³ | DIN 53516 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ASTM D 395 | 70 hrs@23℃ |
Rebound Resilience | *** % | ASTM D 2632 | Bayshore Rebound |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | ***~*** °C | Internal | TMA melt range |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
