IROGRAN A 92 P 4637 is a thermoplastic polyether-polyurethane for injection moulding and extrusion applications.
Additional characteristics of the product are excellent microbial resistance, high low-temperature flexibility, especially suitable for cable jacket.
PERFORMANCE FEATURES
Excellent hydrolysis resistance
High microbial resistance
High stability of melt
Easy coloring
Low-temperature flexibility
APPLICATIONS
For the production of jacket material for cables, jackets for high pressure hosesspiral hoses, profiles.
| Original Document | Technical Datasheet(English) | |||
| Features | Good ColoringAntimicrobialHydrolysis Resistance | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
190℃/21.6 kg | *** cm³/10 min | Internal | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
- | *** % | Internal | |
Abrasion resistance | *** mm³ | ISO 4649 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** psi | ASTM D 412 | |
- | *** Mpa | DIN 53504 | |
at 100% strain | *** psi | ASTM D 412 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** psi | ASTM D 412 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@23℃ |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ISO 815 | 24 hrs@23℃ |
Compression Set | *** % | ISO 815 | 24 hrs@70℃ |
Rebound Resilience | *** % | Internal | Bayshore Rebound Resilience |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
Shore D hardness | *** D | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
