IROGRAN A92E 4860 is a high performance polyester based thermoplastic polyurethane intended for extrusion and injection moulding applications.
IROGRAN A92E 4860 is part of the HUNTSMAN technical extrusion product range and offers a specially designed, flexible material with a broad processing window particularly suitable for the preparation of spiral tubing, pneumatic tubing, belting and technical mouldings.
PERFORMANCE FEATURES
High tensile strength
Excellent wear performance
Excellent hydrolysis resistance
Good low temperature flexibility
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthWear/Abrasion ResistanceHydrolysis Resistance | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | DIN 53479 | |
Melt Mass Flow Rate(MFR) | |||
210℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
- | *** % | Internal | |
Abrasion resistance | *** mm³ | Internal | |
Abrasion resistance | *** mm³ | DIN 53516 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** psi | ASTM D 412 | |
- | *** Mpa | DIN 53504 | |
at 100% strain | *** psi | ASTM D 412 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** psi | ASTM D 412 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Tear Strength | *** N/mm | DIN 53515 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ASTM D 395 | 70 hrs@23℃ |
Compression Set | *** % | DIN 53517 | 24 hrs@70℃ |
Compression Set | *** % | DIN 53517 | 70 hrs@23℃ |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | DIN 53505 | |
Shore D hardness | *** D | ASTM D 2240 | |
Shore D hardness | *** D | DIN 53505 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermo mechanical analysis | ***~*** °C | Internal | TMA Low - High |
Thermo mechanical analysis | *** °C | Internal | TMA Peak |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
