IROGRAN A 92 E 4738 is a white-colored, thermoplastic special-polyester-polyurethane for injection moulding applications.
Additional characteristics of the product are flexibility and high mechanical resistance.
PERFORMANCE FEATURES
High oil resistance
Good melt flow
High wear resistance
Dynamically highly loadable
Low-temperature flexibility
APPLICATIONS
For the production of tooth belts, round cordsprofiles, high pressure hoses.
| Original Document | Technical Datasheet(English) | |||
| Features | Oil ResistantGood Flow | |||
| Appearance | Pellets/GranulesWhite | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
210°C/10.0 kg | *** cm³/10 min | Internal | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@23℃ |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ISO 815 | 24 hrs@23℃ |
Compression Set | *** % | ISO 815 | 24 hrs@70℃ |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
Shore D hardness | *** D | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
