Type: ESTANE® ECO 12T85 is a high-performance bio-based thermoplastic polyurethane. With Ca 46% bio-based content.
Main application: Injection Molding
Special Features: Properties similar to standard TPU of same hardness, excellent mechanical properties and abrasion resistance.
| Original Document | Technical Datasheet(English) | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Bio-based | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 2781 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
Biobased content | *** % | ASTM 6866 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2/5A/200 | |
at 100% strain | *** Mpa | ISO 527-2/5A/200 | |
at 300% strain | *** Mpa | ISO 527-2/5A/200 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2/5A/200 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
