IROGRAN A 85 P 4854 is a flame-retardant, halogen-free polyether based thermoplastic polyurethane intended for extrusion and injection moulding applications.
IROGRAN A 85 P 4854 is part of the HUNTSMAN technical extrusion product range and offers a specially designed, flexible material with a broad processing window particularly suitable for the preparation of cable jacketing where enhanced fire retardency is required.
PERFORMANCE FEATURES
High tensile strength
Excellent wear performance
Excellent hydrolysis & microbial resistance
Good low temperature flexibility
Halogen free
Flame retardant
Matt surface
UL 94 Classification V0
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantHalogen FreeMatt SurfaceWear/Abrasion ResistanceAntimicrobialHydrolysis Resistance | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
190℃/21.6 kg | *** cm³/10 min | Internal | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
- | *** % | Internal | |
Abrasion resistance | *** mm³ | ISO 4649 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
- | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Tear Strength | *** N/mm | ASTM D 624 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermo mechanical analysis | *** °C | Internal | TMA High |
Thermo mechanical analysis | *** °C | Internal | TMA Low |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
