IROGRAN A 85 P 4394 is a high performance polyether based thermoplastic polyurethane intended for extrusion and injection moulding applications.
IROGRAN A 85 P 4394 is part of the HUNTSMAN technical extrusion product range and offers a specially designed, flexible material with a broad processing window particularly suitable for the preparation of tubing, cable jacketing and technical mouldings.
PERFORMANCE FEATURES
High tensile strength
Excellent wear performance
Excellent hydrolysis & microbial resistance
Good low temperature flexibility
| Original Document | Technical Datasheet(English) | |||
| Features | Wear/Abrasion ResistanceAntimicrobialHydrolysis Resistance | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
190℃/21.6 kg | *** cm³/10 min | Internal | |
Mold Shrinkage | |||
- | *** % | Internal | |
Abrasion resistance | *** mm³ | ISO 4649 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
- | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@23℃ |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ISO 815 | 24 hrs@23℃ |
Compression Set | *** % | ISO 815 | 24 hrs@70℃ |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermo mechanical analysis | *** °C | Internal | TMA High |
Thermo mechanical analysis | *** °C | Internal | TMA Low |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
