IROGRAN A 85 P 4380 is a flame-retardant, halogen-free, thermoplastic polyether-polyurethane intended for extrusion and injection moulding applications.
Additional characteristics of the product are excellent microbial resistance, high low-temperature flexibility, especially suitable for cable jackets.
PERFORMANCE FEATURES
Excellent hydrolysis resistance
High microbial resistance
Low-adhesion surfaces
Flame retardant
Halogen-free
Good melt flow
UL 94 Classification V2
APPLICATIONS
Cables
Hoses
Profiles
Cable Bushings
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantHalogen FreeAntimicrobialHydrolysis ResistanceGood Flow | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
190℃/21.6 kg | *** cm³/10 min | Internal | |
Mold Shrinkage | |||
- | *** % | Internal | |
Abrasion resistance | *** mm³ | ISO 4649 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
- | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@23℃ |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ISO 815 | 24 hrs@23℃ |
Compression Set | *** % | ISO 815 | 24 hrs@70℃ |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermo mechanical analysis | *** °C | Internal | TMA High |
Thermo mechanical analysis | *** °C | Internal | TMA Low |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-2 | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
