IROGRAN A 60 E 4902 is a soft, high performance polyester based thermoplastic polyurethane intended for extrusion and moulding applications.
IROGRANA 60 E 4902 is part of the HUNTSMAN Film and Sheet and Injection-Moulding product ranges. It is processable at low temperatures and offers a specially designed, flexible material suitable for elastic films & mouldings.
PERFORMANCE FEATURES
Excellent elasticity
Excellent wear performance
Good low temperature flexibility
Enhanced Hydrolytic Stability
Enhanced UV stability
Low temperature processability
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturWear/Abrasion ResistanceEasy processingUV StabiltiyHydrolysis ResistanceSoft | |||
| Processing | InjectionExtrusionSheet ExtrusionFilm Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | DIN 53478 | |
Abrasion resistance | *** mm³ | Internal | |
Abrasion resistance | *** mm³ | DIN 53516 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
- | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Tear Strength | *** N/mm | DIN 53515 | |
Compression Set | *** % | ASTM D 395 | 24 hrs@70℃ |
Compression Set | *** % | ASTM D 395 | 70 hrs@23℃ |
Compression Set | *** % | DIN 53517 | 24 hrs@70℃ |
Compression Set | *** % | DIN 53517 | 70 hrs@23℃ |
Tensile Set | *** % | ASTM D 412 | 200% Elongation |
Tensile Set | *** % | DIN 53504 | 200% Elongation |
Rebound Resilience | *** % | ASTM D 2632 | Bayshore Rebound |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | DIN 53505 | |
Shore D hardness | *** D | ASTM D 2240 | |
Shore D hardness | *** D | DIN 53505 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermo mechanical analysis | *** °C | Internal | TMA High |
Thermo mechanical analysis | *** °C | Internal | TMA Low |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
